Chem-Ease Safety Shower

Unique Safety Shower

The ChemEase safety shower is a uniquely designed, all-in-one: remote location safety shower system, with built-in eyewash station. This completely packaged system is easy to install, only requiring bolt down to a concrete slab and single-phase power hook-up.

Ideal For Remote Sites

The system has a plentiful water capacity of 1,850 L allowing 15 mins of continuous use. Water is treated through twin 5-micon cartridge filters and UV disinfection ensuring water quality is suitable for both shower and eyewash use.


The ChemEase Safety Shower is a standalone system, with no potable water supply required, incorporating the follow features:

DESIGN Package
  • Shower and eyewash, meets AS for safety showers
  • Automatic pressure pump to provide pressurised water to the shower/eyewash
  • Headspace UV lamp in the storage tank to provide sterile conditions
  • Twin 5-micron cartridge filters to provide filtered water
  • Inline UV disinfection unit on the delivery pipework to shower/eyewash
  • Electric water heater for hot water storage
  • Tempering valve for providing ambient water to the shower/eyewash in accordance with AS4775-2007
  • Green, fluorescent lighting over shower
  • Only requires a single-phase power supply
  • Wind rated design for Australian cyclonic conditions
Skid Package
  • Packaged on a 316 stainless steel skid
  • Vandal proof cage protects the controls and equipment
  • Fast installation, only requires bolt down and power hook-up
  • Remote monitoring via a 4G modem
  • Alarms:
    • Low water level
    • Blocked filters
    • Safety shower activated
  • Power requirements: 240V, 50Hz
  • Power consumption: 25A (full load)
  • Fill point: 2” camlock
  • Total water storage volume: 1,850L
  • Prefiltration: 5-micron
  • UV disinfection: Yes, dual UV
  • Remote monitoring: Yes
  • Alarms: Yes
  • Wind rating: Category D
  • Opt: Snake/rodent proof cladding

Manufactured under ISO 9001 certification, our Chem-Ease System is also fully factory tested and approved prior to delivery and site. The safety shower and built-in eyewash station components meet Australian Standard 4775-2007.

AKS also carries ISO certification for 14001 Environmental Management and 45001 for OH&S Management.


Installation is made easy using our step-by-step, mount and play, Installation and Maintenance Guide. Chem-Ease Systems are pre-packaged and factory tested, before dispatch to site, ensuring you can be fully operational without minimal  fuss. You only need to bolt down the Chem-Ease Systems to a pre-laid concrete slab and connect the single-phase power supply. Once filled with water undertake a the test routine as described in the Installation and Maintenance Guide.


Maintenance is reduced to a minimum, with topping up of water the only regular task required, should the unit be used within a routine maintenance cycle. All other routine maintenance should be completed as specified in the Installation and Maintenance Guide. This includes the replacement of lights and filters as required.

Our new Chem-Ease safety shower system (patent pending), offers customers a unique solution that helps deal with chemical spills that come in contact with people. This all-in-one safety shower system, with built-in eyewash station, is a completely packaged system that is easy to install and operate. Ideal for remote location: industrial, mining and defence sites, or where a large store of chemicals is stored in a remote locations where there is limited access to water supply.. Read more