The SM series re-circulation pumps are used to transfer large volumes of water from adjoining tanks in presence of average (not high) head values.
MOTOR
- Three-phase squirrel cage type
- Windings from 6 to 12 poles, IP 68 protection degree
- Insulation class H=180°C
- Service factor S1, with a max of 15 startings per hour.
- Standard execution 400V – 50Hz
- Motors with different voltages and frequencies are available upon request.
SHAFT
- Made of stainless steel, supported by life-lubricated ball bearings.
- Double mechanical, realized in silicon carbide in order to allow the maximum resistance to abrasion.
MONITORING
- Infiltration Monitoring by water probe into the oil chamber for the timely warning of possible in infiltration through the shaft seal.
- Temperature Monitoring by thermal sensor into the winding, which warns or stops the pump in case of motor overheat.
PERFORMANCE
- Given the employment versatility of the SM mixers, it is advisable to consider the density of the liquid to be mixed and its chemical-physical characteristics; a particular attention will have to be paid to the geometry of the basin and to the kind of treatment to be carried out.
- Our technical department is available to provide assistance with information on all mixing systems installation.
Constructed from hard wearing rust resistant materials, Orb Mixers have been proven in the field over years of reliable service. Manufactured under strict ISO 9001 standards and factory pre-commissioned.
AKS also carries ISO certification for 14001 Environmental Management and 45001 for OH&S Management.
AKS Industries offers a range of water and wastewater mixers under the Orb Mixer brand name. Mixing technology plays an important role at the secondary treatment stage providing mixing and sludge suspension in tanks, ponds, ditches, dams and reservoirs. Orb Mixers are available in a host of types, sizes and configurations, so there’s a Orb Mixer model suited to almost every conceivable application. Read more…
